A ready-to-use, rapid-setting water plug. It is applied in powder form without the need for mixing with water.
What are the features and advantages of Cement-Based Fast-Setting Plugging Mortar 3 kg?
- Can be applied in both powder and mortar form.
- Easy to apply.
- Instantly sets to form a waterproof plug.
- Does not shrink or crack.
- Does not cause corrosion on reinforced concrete reinforcements.
- Exhibits excellent adhesion to surfaces.
- Has very high mechanical strength.
- Compatible with all types of waterproofing materials applied over it.
Where is Cement-Based Fast-Setting Plugging Mortar 3 kg used?
- For stopping active water leaks and drying surface water,
- On all types of mineral-based surfaces,
- In elevator pits,
- In areas with water leakage such as water tanks, swimming pools, and ornamental pools,
- In engineering structures such as subways, tunnels, dams, and highways.
How to use Cement-Based Fast-Setting Plugging Mortar 3 kg?
Surfaces must be damp, clean, and solid. All dust, oil, dirt, rust, formwork oil, detergents, and similar adhesion-preventing substances and residues must be removed. In the case of segregation in the concrete, damaged or loose parts must be removed. The product is generally used in areas with water leakage, therefore the presence of water on the surface is sufficient. SH 505 is applied in powder form. Always wear gloves during application. Take a small amount of powder into your palm and apply it directly onto the active water leakage point in one swift motion. Hold it in place until the water flow stops. SH 505 can also be applied by mixing with water; however, in this case, very fast action is required. Surfaces can be cleaned with water immediately after application.
