Actiwex 511 is a single-component, ready-to-use bitumen solution based on modified bitumen and solvent, used for waterproofing and moisture protection. After the solvent in its composition evaporates, it strongly adheres to the surface, forming a water-resistant film layer.
What are the features and advantages of Bitumen-Rubber-Based Solvent-Based Liquid Membrane 511, 18 kg?
- It has a strong adhesion property to the surface (concrete, plaster, metal, etc.) it is applied to.
- It begins to dry shortly after application, forming a film-like layer on the surface that resembles a paste.
Where is Bitumen-Rubber-Based Solvent-Based Liquid Membrane 511, 18 kg used?
- Used on foundation and basement floors and walls to prevent moisture.
- When applied to building facades, it prevents water and moisture, thereby preventing swelling, paint damage, and mold formation on interior walls.
- Used as a primer before bituminous coatings in foundation and roof insulation applications.
- When used with fiberglass mesh or bitumen cardboard, it creates a waterproof layer.
- Prevents corrosion when applied to metal surfaces exposed to water in vehicles.
- Prevents corrosion on metal surfaces both underground and above ground.
How to use Bitumen-Rubber-Based Solvent-Based Liquid Membrane 511, 18 kg?
Surface Preparation:
The surface to be applied should be free from dust, dirt, rust, and oil; loose particles should be scraped off; sharp edges and corners should be rounded.
Application Method:
After cleaning the surface from dust, oil, construction debris, and dirt, it should be dried and then applied directly or mixed with gas or thinner if necessary. It is applied with a brush. Adequate ventilation should be ensured when applying in closed areas. The drying time is at least 24 hours, depending on climatic conditions.
