Cement-based, polymer-modified adhesive mortar containing fillers, used for bonding tiles and ceramics on horizontal surfaces. It is classified as a C1 adhesive mortar.
Where Is It Used?
- For bonding tiles, ceramics, faience, granite, marble, decorative brick, glass mosaics, as well as artificial and natural stones;
- In both horizontal and vertical applications in indoor and outdoor areas of buildings, and for ceramic cladding materials with high absorption;
- In wet environments such as bathrooms, kitchens, balconies, terraces, swimming pools, and water tanks.
Product Features
- CE Classification: C1
- Suitable for use in both indoor and outdoor environments.
- Easy to prepare and apply, with an extended working time.
- Can be safely applied on both horizontal and vertical surfaces.
- After curing, it is resistant to water and freeze-thaw conditions.
- Resistant to impact and vibrations, and exhibits high adhesion.
- Provides excellent adhesion on various surface types such as concrete, cementitious mortars, stone, brick, and more.
Application Instructions
The material should be mixed with an electric mixer for 3–4 minutes, allowed to rest for 5 minutes, and then mixed again before use. Under normal temperature and humidity conditions, the ceramics must be installed onto the combed mortar within 20 minutes. The open time is approximately 20 minutes under standard conditions; however, this period may be shorter depending on environmental factors. During application, maintain the desired joint spacing between the ceramics and lightly press them to ensure full contact between the mortar and the ceramic surface, allowing the mortar to embed completely. Joint filling should be performed approximately 24 hours after wall installations and about 48 hours after floor installations. It is recommended to use an appropriate AKTİWEX JOINT FILLER for the joints.
