A cement and synthetic resin-based, dual-component, semi-elastic waterproofing material.
Dual-Component Semi-Elastic Waterproofing – 25 kg: Features and Advantages
- Suitable for indoor and outdoor use. Requires a protective topcoat when applied outdoors.
- Safe for contact with potable water.
- High compressive strength.
- Non-shrink and crack-resistant.
- Applicable on horizontal and vertical surfaces.
- Free of corrosive or toxic substances, making it safe for potable water tanks.
Where is Dual-Component Semi-Elastic Waterproofing – 25 kg Used?
- Waterproofing concrete, cement mortar, and plastered surfaces in indoor/outdoor environments.
- Curtain wall and partition wall insulation.
- Static areas of concrete structures.
- Waterproofing wet areas (e.g., bathrooms, balconies, WC).
- Water tanks, swimming pools, decorative ponds.
- Engineering structures like metro systems, tunnels, dams, and highways.
- Recommended for drywall surfaces.
How to Use Dual-Component Semi-Elastic Waterproofing – 25 kg
Surface Preparation: Substrates must be clean, dry, dust-free, structurally sound, and free of frost, efflorescence, or loose particles. Repair damaged surfaces prior to application. Application Conditions: Optimal ambient temperature: +5°C to +35°C. Avoid application in high humidity, extreme heat, or direct sunlight. Application: 1. Gradually add the powder component to the liquid component and mix with a low-speed mixer for 5 minutes until homogeneous. 2. Let the mixture rest for 5 minutes, then remix for 1 minute before use. 3. Apply using a brush or trowel in two layers, ensuring a minimum 6-hour interval between layers. Layers should be applied perpendicular to each other. 4. Maintain a minimum thickness of 3mm. Use waterproofing tape at corners. 5. Allow at least 3 days of curing before applying tiles, ceramics, or other finishes.
