it is CI Class adhesive mortar which contains polymer modified fillers and is used for adhering tiles and ceramics on horizontal surfaces
Places of Usage
- It is used
- For adhering tiles, ceramics, tiles, granites, marbles, decorative bricks, glass mosaics, artifical and natural stones.
- In horizontal and vertical applications in the interior and exterior of buildings,
- In all kinds of ceramic coating materials with high absorbency,
- In wet areas such as bathrooms, kitchens, balconies, terraces, swimming pools, water reservoir.
Features and Advantages
- It is used in interior and exterior. it is easily prepared and applied, and the processing time is long.
- It can be applied safely on horizontal and vertical surfaces. After curing, it is resistant to water and frost.
- It is resistant to impacts and vibrations and shows high adhesion.
- It shows very good adhesion on diFFerent types OF surfaces like concrete, cement mortars, stone, briquette
Application
The material should be mixed with electric mixers for 3-4 minutes, rested for 5 minutes and then mixed again and used. Ceramics are adhered to the mortar which notched in 20 minutes under normal temperature and humidity conditions. The uncovered waiting time is approximately 20 minutes under normal temperature and humidity conditions. Depending on the environment conditions, the adhering time may be shorter. During adhering, the desired joint gap is left between the ceramics, and the mortar on the surface is pressed lightly to ensure full contact with the ceramic and the mortar is allowed to float in it. Mortar should be done after approixmately 24 hours for wall applications and after approximately 48 hours for floor applications. it is recommended to use a suitable AKTIWEX JOINT FİLLER in the joints.
